Test drive vehicle. Set up to measure alignment specs. on all four wheels and adjust front toe angle
Change oil, oil filter, top off fluids, lubricate chassis when applicable and check tire pressure.
ALTERNATOR DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
RADIATOR HOSE – Remove & Replace – Both
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
TIE ROD &/OR END – Remove & Replace – One – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed.]
Linda K. gave our service a 5 star review on 4/27/2023