Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Bring antifreeze to -35 degrees. PH balance coolant to between 9.8 to 10.5. Check thermostat and electric cooling fan operation.
HEATER HOSES – Remove & Replace – Base One – [NOTE: Deduct 0.2 when used in conjunction with Radiator Hose(s) – R&R.]
James K. gave our service a 5 star review on 9/9/2021
CONTROL ARM – Remove & Replace – Lower,One Side – [DOES NOT include alignment.]
Test drive vehicle. Set up to measure alignment specs. on all four wheels and adjust front toe angle
TIE ROD &/OR END – Remove & Replace – Outer,Both – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing Inner Tie Rod End(s) on some models
CONTROL ARM – Remove & Replace – Lower,One Side – [DOES NOT include alignment.]
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – One – [DOES NOT include disassemble or alignment.]
Test drive vehicle. Set up to measure alignment specs. on all four wheels and adjust front toe angle
TIE ROD &/OR END – Remove & Replace – Inner,One Side – [Includes: R&I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replaci
Sylvia G. gave our service a 5 star review on 3/10/2021